Home >X Competition Sets

Competition Sets

Sort by:
select

Already purchased your TETRIX® FTC Competition Set? Need more than one for testing? For backup? Well here is your second chance. With the TETRIX FTC Competition Set, you will receive a well-rounded selection of TETRIX MAX components for building a robot that can successfully compete in the FIRST® Tech Challenge competition. The set includes 843 heavy-duty pieces that will enable your team to apply its creativity and engineering knowledge to complete the challenge.

TETRIX FTC Competition Set includes:

  • Brackets and mounts
  • Structural channels, angles, and plates
  • Wheels and gears
  • Omni wheels
  • Battery pack and charger
  • High-resolution motor shaft encoders
  • Servos and DC Motors
  • Fasteners and tools
  • Storage bin

Among the set are new TETRIX MAX pieces such as the 64 mm, 96 mm, 160 mm, and 288 mm Flats, Standard-Scale Servo Motor Brackets, Stand-Off Posts, and more.

$725.00

Designed especially for SkillsUSA, the Robotics: Urban Search & Rescue Challenge Set features heavy-duty, aircraft-grade aluminum elements for construction, powerful drive motors, and expandable capabilities. TETRIX® provides the ideal platform for creativity. The patented hole pattern on TETRIX structural pieces is unique to this system and enables competitors to attach pieces at angles as well as horizontally and vertically.

The challenge kit includes the following:

  • Brackets and mounts
  • Structural channels and plates
  • Structural tubing and hubs
  • Wheels, gears, and drive trains
  • NiMH battery pack and charger
  • R/C transmitters, receivers, and motor controllers
  • Wireless camera

Requires AA batteries, sold separately.

Note: This set does not provide instructions to build a specific robot, including the one pictured. It has a builder’s guide illustrating a basic chassis build, proper wiring, etc. The set is designed for the USAR, which is an engineering competition in which competitors design and build their own original robot.

$799.00

Competing in the World Robot Olympiad's university bowling game? Then check out this new TETRIX® set designed just for the event's competitors! With the TETRIX WRO Set, we are delivering into your hands a well-rounded selection of components for building an autonomous robot that can successfully complete the WRO bowling game. These parts enable your team to apply its creativity and engineering know-how to tackle the challenge.

The TETRIX WRO Competition Base Set comes with:

  • 130 aluminum TETRIX MAX structural components.
  • 2 MAX Wheels and a set of Omni Wheels with a variety of axles, bushings, and hubs.
  • 15 total gears and a Linear Slide Pack.
  • 2 DC motors; a CR servo; a standard servo;, motor encoders; and an assortment of cables, brackets, and more.
  • HiTechnic Servo Controller, DC Motor Controller, and On/Off Switch.
  • Hundreds of screws and kep nuts plus other needed hardware.
  • 12-volt, 3,000 mAh battery pack, charger, and mounts.
  • Assorted small tools and fasteners and storage bin.

$999.00

Competing in the World Robot Olympiad's university bowling game? Then check out this new TETRIX® set designed just for the event's competitors! With the TETRIX WRO Challenge Full Set, we are delivering into your hands everything you need for building an autonomous robot that can successfully complete the WRO bowling game. These parts enable your team to apply its creativity and engineering know-how to tackle the challenge.

The TETRIX WRO Challenge Full Set comes with:

  • 130 aluminum TETRIX MAX structural components.
  • 2 MAX Wheels and a set of Omni Wheels with a variety of axles, bushings, and hubs.
  • 15 total gears and a Linear Slide Pack.
  • 2 DC motors; a CR servo; a standard servo; motor encoders; and an assortment of cables, brackets, and more.
  • HiTechnic Servo Controller, DC Motor Controller, and On/Off Switch.
  • Hundreds of screws and kep nuts plus other needed hardware.
  • 12-volt, 3,000 mAh battery pack, charger, and mounts.
  • National Instruments myRio Controller.
  • LabVIEW Software Student Edition.
  • Adapter.
  • Assorted small tools and fasteners and storage bin.

$1,695.00
First PagePrevious Page
1
Next PageLast Page
Products to display:
select
   Items 1 to 4 of 4
First PagePrevious Page
1
Next PageLast Page
Products to display:
select
   Items 1 to 4 of 4

Narrow By:

Product Type

Product Line