Home >X Motor and Servo Mounts

Motor and Servo Mounts

Items 1 to 16 of 16
Sort by:

An increased number of attachment holes makes this two-piece DC motor mount more flexible – mount a motor between or alongside channels as well as on top of them.

$15.95

Keeping spare motors on hand is always a good idea. We’ve made stocking up on these critical elements easy with this bulk pack.

Includes:

  • 4 twelve-volt DC motors (39530)
  • 4 motor mounts (39089) and motor hubs (39079)
  • Variety of DC motor leads

$135.00

Attaches the DC Drive Motor to your robot. Includes the TETRIX® MAX Motor Mount, two kep nuts, and two cap screws.

$7.95

Utilizing front-facing mounting holes, this bracket enables you to power a shaft through TETRIX® structural elements for extra support in heavy-duty servo applications. Use with a quarter-scale servo; includes eight 32 mm TETRIX Stand-Off Posts.

$9.95

For when additional servo motors are needed to bring a robotic creation to life, this bulk pack provides you with a number of extra motors and mounting brackets.

Includes:

  • 4 180-Degree Standard-Scale HS-485HB Servo Motors (39197)
  • 4 standard servo mounting kits (41789)

$139.00

This mounting kit enables easy alignment of standard-size servo motor shafts to the TETRIX® hole pattern. The flexible attachment options allow for a multitude of design possibilities. Includes mounting plate, bearings, stand-offs, and aluminum servo shaft to 4.7 mm steel D-shaft axle adapter.

$10.95

Utilizing front-facing mounting holes, this bracket enables you to power a shaft through TETRIX® structural elements for extra support in heavy-duty servo applications. Use with a standard-scale servo; includes six 32 mm TETRIX Stand-Off Posts.

$5.95

Providing you flexibility in positioning a servo, this frame mounting bracket holds the servo and can be attached in several ways. Easy to use. For use with a standard-scale servo; includes two 16 mm round aluminum mounting stand-offs.

$11.95

Providing you flexibility in positioning a servo, this Frame Mounting Bracket holds the servo and can be attached in several ways. Easy to use. For use with a quarter-scale servo; includes two 16 mm round aluminum mounting stand-offs.

$11.95

Used with the frame mounting bracket, the pivot arm creates strong, durable pivot joints while minimizing side load on the servo shaft. Compatible only with TETRIX® MAX Standard-Scale Servo Frame Mounting Bracket (39382); includes a 3 mm bearing pack.

$8.95

Used with the Frame Mounting Bracket, the Pivot Bracket creates strong, durable pivot joints while minimizing side load on the servo shaft. Compatible only with TETRIX® Quarter-Scale Servo Frame Mounting Bracket (39383); includes a 3 mm Bearing Pack.

$8.95 $4.95

When you need double the power, this bracket does the trick. Use it to attach two motors side by side. Made of heavy-duty aluminum.

$7.95 $4.95

Each bracket features a pivot bearing. Made of heavy-duty aluminum. Compatible only with TETRIX® Single Standard-Scale Servo Motor Brackets (39060).

$10.95 $4.95

Heavy-duty aluminum brackets each hold one servo in place.

$9.95

Get more gearing options with this adjustable bracket that features 16 mm of horizontal adjustability. Just attach a servo, sold separately, and bracket close to the gears and slide it over for a perfect fit!

$10.95

Adding servos to TETRIX® PRIME proves to be simple with this mount. Made of acetal plastic, each mount holds one servo in place.

$3.50
First PagePrevious Page
1
Next PageLast Page