Home > Controllers and Electrical >X Power Accessories

Power Accessories

Items 1 to 16 of 34
Sort by:

Designed to use with TETRIX® PRIZM® Robotics Controller, this motor controller connects to the PRIZM expansion port, enabling users to control up to six additional servo motors and two additional continuous rotation servo motors. Up to four motor controllers can be connected to the PRIZM expansion port. Additional power and expansion ports support daisy-chain configurations.

Supported programming languages include Arduino and EV3. The motor controller can be connected to the LEGO® EV3 Brick. Software blocks can be downloaded from the Resources tab below.

$99.95

This set has everything you need to turn a TETRIX® MAX R/C Robotics Set into a TETRIX MAX Programmable Robotics Set.

$220.00

The TETRIX® PRIZM® Robotics Controller is a fully integrated, programmable brain for your bot that features a variety of motor, servo, encoder, and sensor ports with convenient connectors that enable you to control your robot's behavior like never before. This controller offers the best of both worlds – a learning tool that is powerful yet easy to use. With PRIZM you can take learning to new heights by creating robots that are smarter, more precise, and as real world as it gets.

The controller is specifically developed for use with the TETRIX MAX building system and comes with programming support for the Arduino Software (IDE), which is compatible with Windows, Mac OS X 10.7 or newer, and Linux devices that have a USB port.

The PRIZM Robotics Controller features:

  • 32 KB flash programmable memory
  • ATmega328P processor with Arduino Optiboot bootloader installed
  • 4 digital sensor ports (D2 can be used as a serial port) and 3 analog sensor ports
  • 1 i2C port, 1 USB programming port, 1 motor controller expansion port, and 2 quadrature encoder input ports
  • 2 high-current DC motor control ports
  • 6 standard control servo ports and 2 continuous rotation (CR) servo ports
  • Battery connection port (additional port used to daisy-chain power to other devices)
  • Programmable Start button (green) and a non-programmable Stop/Reset button (red)

$179.00

This set has everything you need to turn a TETRIX® PRIME R/C Robotics Set into a TETRIX PRIME Programmable Robotics Set.

$179.00

TETRIX® PULSE™ is a programmable robotics controller specifically developed for the TETRIX PRIME system that is powerful yet easy to use and, when combined with the TETRIX Ardublockly software and Arduino Software (IDE), can provide an ideal learning tool for teaching graphic or syntax-based coding.

TETRIX Ardublockly is drag-and-drop block-based graphic coding software used to program the PULSE controller. In addition, the PULSE controller can be programmed with a syntax-based coding method using the Arduino Software (IDE) and the PULSE Arduino Library.

The TETRIX PULSE Robotics Controller features the following:

  • 2 DC motor control ports and 6 standard control servo ports
  • 3 digital sensor ports that can be configured as digital input, digital output, or serial communication and 3 analog sensor ports (A1-A3 can be configured as analog input or digital input or output.)
  • 1 i2C port, 1 USB programming port, and 2 quadrature encoder input ports
  • 1 battery connection port
  • 1 power on/off switch
  • 1 programmable Start push button and 1 Stop/Reset push button
  • 3 LED indicators: red, green, and yellow

$99.00

This motor controller connects to the PRIZM® expansion port, enabling users to control up to two additional 12-volt DC motors. Up to four motor controllers can be connected to the PRIZM expansion port. There are two H-bridge outputs to control the speed and direction of two DC motors and two quadrature encoder input ports. Additional power and expansion ports support daisy-chain configurations.

Supported programming languages include Arduino and EV3. The motor controller can be connected to the LEGO® EV3 Brick. Software blocks can be downloaded from the Resources tab below.

$129.95

Take control of your TETRIX® DC motors – this controller plugs into your TETRIX wireless gamepad receiver to enable you to control the speed and direction of two TETRIX 12-volt DC motors.

$89.95

Buying a new gamepad system when only the receiver is lost or damaged is wasteful and expensive. We’ve solved that problem by offering this replacement 2.4 GHz receiver that comes with built-in mounting tabs that align with the TETRIX® hole pattern.

$11.95

The TTX610 airplane radio system uses the advanced 2.4 GHz spread-spectrum Secure Link Technology (SLT) protocol for solid, interference-free control of R/C models.

Features:

  • TR625 twin antenna receiver
  • Wired and wireless trainer functions
  • Quad-bearing gimbals
  • Digital trims
  • V-tail and elevon mixing
  • Built-in charge jack
  • Switched fifth and sixth channels

$163.95

The NXTServo-v3 Module is designed to work with the LEGO® NXT or EV3 Brick, enabling you to add programming and sensors to your TETRIX® PRIME robots. This module will control the speed and position of up to eight TETRIX PRIME servo motors, using commands sent from the NXT or EV3. Software blocks for NXT and EV3 software, as well as programming examples for ROBOTC® and LabVIEW™, can be downloaded here (.zip file, 250 KB).

Note: One motor channel position must be used to connect the TETRIX PRIME six-volt battery to the module.

$56.25

Take remote control out of the past! This affordable 2.4 GHz, four-channel controller is designed in the gamepad style with dual joysticks to feel more natural to students. Plus, it offers high-end perks, including interference-free performance, servo reversing, motor trim adjustment, easy linking, and a R2004GF receiver.

$39.95

This module is designed to work with LEGO® EV3 Brick. It enables you to add programming and sensors to your TETRIX® PRIME robots. You can control the speed and position of up to six TETRIX PRIME servo motors and two TETRIX PRIME DC motors. The module is powered by the TETRIX PRIME 6-volt battery. Software blocks and programming examples for EV3 are available for download.

$59.00

The TETRIX® + myRIO Control Board Adapter is designed to easily connect TETRIX Motor Controllers to the NI myRIO. It also contains a built-in logic-level shifting circuit, Grove sensor-family connections, a Gnd expansion port, a 34-pin myRIO I/O expansion port, a +3.3 V expansion port, and a +5 V expansion port.

$49.00

Give sight to your TETRIX robot with this 5.8 GHz camera system. This kit has a 300 meter transmission distance (completely unobstructed), a 40 channel, 5 band receiver with auto-scan feature, and a 25mw receiver with built-in 4.3” backlit color LCD screen for great picture quality. It contains a compact, lightweight color camera with 600 VTL video resolution and 120 degree field of view. The kit comes with a 6 volt rechargeable camera battery and charger. The receiver and display unit are rechargeable via micro USB with 1.5 hour run time (micro USB cable not included).

$290.00

Controls the power from the battery pack to the PRIZM® Robotics Controller with the flip of a switch.

$12.95

Controls the power from the battery pack.

$6.95
First PagePrevious Page
123
Next PageLast Page

Narrow By: