Home > Curriculum Titles >X Courses and Units

Courses and Units

Items 1 to 11 of 11
Sort by:

A pack of four logbooks for the TETRIX® PRIME Robotics: Automation Manufacturing STEM Unit.

$10.85

A pack of four logbooks for the TETRIX® PRIME Robotics: Autonomous STEM Unit.

$10.85

A pack of four logbooks for the TETRIX® PRIME Robotics: Remote Control STEM Unit.

$10.85

Combining the quick prototyping capabilities of the TETRIX® PRIME parts with the strength and ruggedness of the MAX parts, this unit focuses on activities and builds that might be used in manufacturing plants. Using an Arduino board and Arduino with ArduBlock software along with various sensors, students program the computer to accomplish tasks that might normally be found in a manufacturing environment. By combining parts from the two products, students build quick prototypes with the strength to accomplish automated activities that address STEM standards.

This three-week unit comes with 12 starter sets. During the unit, students will:

  • Work in teams of two or three students.
  • Utilize parts from both the PRIME and MAX product lines to build robots to complete various tasks that might occur in an automated factory.
  • Complete activities to build necessary skills for each task.
  • Receive a real-world challenge to complete using the skills learned after each set of activities.
  • Complete guided activities and a data sheet included in a logbook that has them gather data for evaluation and improvement of their robot.

Correlations to Next Generation Science Standards, Common Core Math and Language Arts Standards, and ITEEA technology standards are included. This unit serves 24 students, and add-ons are available for classes larger than 24.

$8,795.00

Combining the quick prototyping capabilities of the TETRIX® PRIME building system with the strength and ruggedness of the MAX parts, this unit focuses on activities and builds that might be used in manufacturing plants. Using a PULSE™ controller and TETRIX Ardublockly software along with various sensors, students program the computer to accomplish tasks that might normally be found in a manufacturing environment. By combining parts from the two products, students build quick prototypes with the strength to accomplish automated activities that address STEM standards.

Curriculum features:

  • 15 hours, or fifteen 50-minute class periods, of hands-on activities with scope and sequence
  • Middle and high school correlations to Next Generation Science, Common Core Math and Language Arts, and ITEEA standards
  • Programming with PULSE controller using the graphical-based TETRIX Ardublockly along with sensor integration
  • Extensive coverage of mechanisms and mechanical systems concepts
  • Application of STEM knowledge and 21st-century skills
  • Progressive series of activities with culminating real-world manufacturing challenge

Add-ons are available for classes larger than 24.

STEM Unit now uses TETRIX® PULSE™ Robotics Controller!

$8,225.00

Using the TETRIX® PRIME R/C Robotics Set and adding sensors and an Arduino UNO controller, this unit focuses on creating a robot to complete tasks without operator input. Using an Arduino board and ArduBlock software along with Ultrasonic and Line Finder Sensors, students write programs to complete various tasks that increase in complexity. Students use PRIME parts to quickly prototype and test different configurations and overcome additional obstacles. STEM standards are addressed with the engaging activities provided in this unit.

This three-week unit comes with 12 robotics sets. During the unit, students will:

  • Work in teams of two to three students.
  • Begin using R/C control and progress to autonomous operation.
  • Use the PRIME R/C Robotics Set, additional controller, and sensors to program a robot to complete tasks.
  • Learn the science behind how each of the sensors functions and how to program them to complete various tasks.
  • Learn to program the robot using ArduBlock and Arduino software.
  • Complete activities to build programming skills to control the robot and interact with sensors.
  • Complete a challenge to finish using the skills learned from the activities after each set of activities.
  • Complete guided activities and data sheets in the logbook that have students gather data for evaluation and improvement of their robot.

Correlations to Next Generation Science Standards, Common Core Math and Language Arts Standards, and ITEEA technology standards are included. This unit serves 24 students, and add-ons are available for classes larger than 24.

$6,995.00

Using the TETRIX® PRIME building system and adding sensors and the PULSE controller, this unit focuses on creating a robot to complete tasks without operator input. Using the TETRIX Ardublockly software along with ultrasonic and line-follower sensors, students write programs to complete various tasks that increase in complexity. Students use PRIME parts to quickly prototype and test different configurations and overcome additional obstacles. STEM standards are addressed with the engaging activities provided in this unit.

Curriculum features:

  • 15 hours, or fifteen 50-minute class periods, of hands-on activities with scope and sequence
  • Middle and high school correlations to Next Generation Science, Common Core Math and Language Arts, and ITEEA standards
  • Programming with PULSE™ controller using the graphic-based TETRIX Ardublockly along with sensor integration
  • Extensive coverage of mechanisms and mechanical systems concepts
  • Application of STEM knowledge and 21st-century skills
  • Progressive series of activities with culminating challenge

STEM Unit now uses TETRIX® PULSE™ Robotics Controller!

$7,995.00

The principles of building a remote-controlled robot and using this robot to complete various engaging challenges are the focus of this STEM Unit. The TETRIX® PRIME R/C Robotics Set is used for the basic building parts for students to construct various robots and complete challenges while addressing science, technology, engineering, math, and language arts standards. The PRIME building system enables students to quickly prototype a variety of robots, test them, and engineer them for improved performance.

This three-week unit comes with 12 robotics sets. During the unit, students will:

  • Work in teams of two students.
  • Use the PRIME R/C Robotics Set with additional parts to assemble robots that will be used to demonstrate gear ratios, levers, and mechanical advantage.
  • Complete activities to build skills in using gears to perform specific tasks such as speed up the movement of the robot, slow down the movement of the robot, make control easier, lift a heavier load, or raise an object higher.
  • Receive a challenge to complete using the skills learned after each of the three activities. Each challenge culminates with a competition among students with their robots.
  • Complete guided activities and a data sheet included in a logbook that has them gather data for evaluation and improvement of their robot.

Correlations to Next Generation Science Standards, Common Core Math and Language Arts Standards, and ITEEA technology standards are included. This unit serves 24 students, and add-ons are available for classes larger than 24.

$4,895.00

The principles of building a remote-controlled robot and using this robot to complete various engaging challenges are the focus of this STEM Unit. The TETRIX® PRIME R/C Robotics Set is used for the basic building parts for students to construct various robots and complete challenges while addressing science, technology, engineering, math, and language arts standards. The PRIME building system enables students to quickly prototype a variety of robots, test them, and engineer them for improved performance.

Curriculum features:

  • 15 hours, or fifteen 50-minute class periods, of hands-on activities with scope and sequence
  • Middle and high school correlations to Next Generation Science, Common Core Math and Language Arts, and ITEEA standards
  • Extensive coverage of mechanisms and mechanical systems concepts
  • Application of STEM knowledge and 21st-century skills

Add-ons are available for classes larger than 24.

$5,350.00

Want three robotics curriculum units? This package provides everything necessary to incrementally implement TETRIX® PRIME Robotics: Remote Control, TETRIX PRIME Robotics: Autonomous, and TETRIX Robotics: Automation Manufacturing, which combine for nine weeks of robotics.

Curriculum for each unit features:

  • 15 hours, or fifteen 50-minute class periods, of hands-on activities with scope and sequence
  • Middle and high school correlations to Next Generation Science, Common Core Math and Language Arts, and ITEEA standards
  • Programming with PULSE™ controller using the graphic-based TETRIX Ardublockly along with sensor integration
  • Extensive coverage of mechanisms and mechanical systems concepts
  • Application of STEM knowledge and 21st-century skills
  • Progressive series of activities with a culminating real-world challenge

Programming activities now utilize the TETRIX® PULSE™ Robotics Controller!

$9,995.00

Want three robotics curriculum units? This package provides everything necessary to incrementally implement TETRIX® PRIME Robotics: Remote Control, TETRIX PRIME Robotics: Autonomous, and TETRIX Robotics: Automation Manufacturing, which combine for nine weeks of robotics.

In the TETRIX PRIME Robotics: Remote Control STEM Unit, students will:

  • Work in teams of two students.
  • Use the PRIME Robotics Set with additional parts to assemble robots that will be used to demonstrate gear ratios, levers, and mechanical advantage.
  • Complete activities to build skill in using gears to perform specific tasks such as speed up the movement of the robot, slow down the movement of the robot, make control easier, lift a heavier load, or raise an object higher.
  • Receive a challenge to complete using the skills learned after each of the three activities. Each challenge culminates with a competition among students with their robots.
  • Complete guided activities and complete a data sheet included in a logbook that has them gather data for evaluation and improvement of their robot.

In the TETRIX PRIME Robotics: Autonomous STEM Unit, students will:

  • Work in teams of two to three students.
  • Begin using R/C control and progress to autonomous operation.
  • Use the PRIME Robotics Set and an additional controller and sensors set to program a robot to complete tasks.
  • Learn the science behind how each of the sensors functions and how to program them to complete various tasks.
  • Learn to program the robot using ArduBlock and Arduino Software (IDE).
  • Complete activities to build programming skills to control the robot and interact with sensors.
  • Receive a challenge to complete using the skills learned from the activities after each set of activities.
  • Complete guided activities and complete data sheets in the logbook that have them gather data for evaluation and improvement of their robot.

In the TETRIX PRIME: Automation Manufacturing STEM Unit, students will:

  • Work in teams of two or three students.
  • Utilize parts from both the PRIME and MAX product lines to build robots to complete various tasks that might occur in an automated factory.
  • Complete activities to build necessary skills for each task.
  • Receive a real-world challenge to complete using the skills learned after each set of activities.
  • Complete guided activities and complete a data sheet included in a logbook that has them gather data for evaluation and improvement of their robot.

Correlations to Next Generation Science Standards, Common Core Math and Language Arts Standards, and ITEEA Technology Standards are included for each unit.

$9,995.00

Narrow By:

Product Line