Home > Motors and Servos >X Servo Hardware

Servo Hardware

Items 1 to 16 of 19
Sort by:

Designed to use with TETRIX® PRIZM® Robotics Controller, this motor controller connects to the PRIZM expansion port, enabling users to control up to six additional servo motors and two additional continuous rotation servo motors. Up to four motor controllers can be connected to the PRIZM expansion port. Additional power and expansion ports support daisy-chain configurations.

Supported programming languages include Arduino and EV3. The motor controller can be connected to the LEGO® EV3 Brick. Software blocks can be downloaded from the Resources tab below.

$99.95

Providing you flexibility in positioning a servo, this Frame Mounting Bracket holds the servo and can be attached in several ways. Easy to use. For use with a quarter-scale servo; includes two 16 mm round aluminum mounting stand-offs.

$11.95

Utilizing front-facing mounting holes, this bracket enables you to power a shaft through TETRIX® structural elements for extra support in heavy-duty servo applications. Use with a quarter-scale servo; includes eight 32 mm TETRIX Stand-Off Posts.

$9.95

Used with the Frame Mounting Bracket, the Pivot Bracket creates strong, durable pivot joints while minimizing side load on the servo shaft. Compatible only with TETRIX® Quarter-Scale Servo Frame Mounting Bracket (39383); includes a 3 mm Bearing Pack.

$8.95 $4.95

For when additional servo motors are needed to bring a robotic creation to life, this bulk pack provides you with a number of extra motors and mounting brackets.

Includes:

  • 4 180-Degree Standard-Scale HS-485HB Servo Motors (39197)
  • 4 standard servo mounting kits (41789)

$139.00

This mounting kit enables easy alignment of standard-size servo motor shafts to the TETRIX® hole pattern. The flexible attachment options allow for a multitude of design possibilities. Includes mounting plate, bearings, stand-offs, and aluminum servo shaft to 4.7 mm steel D-shaft axle adapter.

$10.95

Utilizing front-facing mounting holes, this bracket enables you to power a shaft through TETRIX® structural elements for extra support in heavy-duty servo applications. Use with a standard-scale servo; includes six 32 mm TETRIX Stand-Off Posts.

$5.95

Providing you flexibility in positioning a servo, this frame mounting bracket holds the servo and can be attached in several ways. Easy to use. For use with a standard-scale servo; includes two 16 mm round aluminum mounting stand-offs.

$11.95

Used with the frame mounting bracket, the pivot arm creates strong, durable pivot joints while minimizing side load on the servo shaft. Compatible only with TETRIX® MAX Standard-Scale Servo Frame Mounting Bracket (39382); includes a 3 mm bearing pack.

$8.95

When you need double the power, this bracket does the trick. Use it to attach two motors side by side. Made of heavy-duty aluminum.

$7.95 $4.95

Heavy-duty aluminum brackets each hold one servo in place.

$9.95

Each bracket features a pivot bearing. Made of heavy-duty aluminum. Compatible only with TETRIX® Single Standard-Scale Servo Motor Brackets (39060).

$10.95 $4.95

Get more gearing options with this adjustable bracket that features 16 mm of horizontal adjustability. Just attach a servo, sold separately, and bracket close to the gears and slide it over for a perfect fit!

$10.95

Replacement pivot bearing for all TETRIX® pivot arms and brackets.

$2.95

For connecting two servos to one channel.

$3.85

Give your servo a little more room to roam with this extension.

$2.15
First PagePrevious Page
12
Next PageLast Page

Narrow By: